
54
© 2015 Atmel Corporation
BLE 4.1 SoC Link Controller and MCU
BLE SoC BTLC1000 SAMB11
CPU Core
Cortex-M0 @ 26MHz
Cortex-M0 w/256KB
stacked Flash
Max PHY rate
1Mbps 1Mbps
Frequency
2.4GHz 2.4GHz
Stacks
and GATT-based
profiles
BLE 4.1
and GATT-based
profiles
BLE 4.1
Applications
Wearable, IoT Wearable, IoT
Interfaces
SPI, UART, I2C
12-15 GPIO
SPI, UART, I2C
30 GPIO
Tx/Rx peak
(mA)
<4/5mA @ 3.0V <4/5mA @ 3.0V
Tx Pout
-30dBm to +4dBm -30dBm to +4dBm
Rx Sensitivity
<-95dBm <-95dBm
Sleep Mode
<1uA (**)<1uA
Package
4x4mm QFN 32L
2.1x2.1mm WLCSP
6x6mm QFN 48L
Power Supply
(†)1.8V – 4.3V (*)2.3V – 3.6V
Temp Range
-40 to +85˚C -40 to +85˚C
• Ultra low power BLE SoC
− Cortex-M0 based Standalone MCU ( SAMB01) or
Companion Link Controller (BTLC1000) to a Host MCU
− Dual mode Slave/Master (up to 8 slaves)
− Integrated Transceiver, Modem, MAC, PA, TR Switch, and
PMU
• Power Consumption:
− Rx: <5mA @3.0V
− Tx: <4mA @3V
− Sleep: <1uA (RTC + 8KB dedicated RAM Retention)
• ARM Cortex M0 32 bit processor
− 128kB embedded islanded RAM (3x32KB, 2x16KB)
− 96KB available for application
− 128kB embedded ROM
− 256KB Stack Flash option (SAMB01 6x6 QFN48 only)
− Multiple low power sleep modes
• Peripherals
− Low power comparator, ADC, and PWM analog I/Os
− RTC, single XO, and optional fully integrated sleep oscillator
• Security: AES-128 & SHA-256 HW encryption
(Secure OTA, Link Encryption on top of BLE)
• BTLC1000 Ultra small form factor:
2.1x2.1mm WLCSP and 4x4 QFN 32L
• Samples March 2015:
4x4 QFN32 BTLC1000 and 6x6 QFN48 SAMB01
• Production Samples August 2015: WLCSP, QFN
(†) 1.5V under investigation
(*) limited by stacked Flash voltage range
(**) Stacked Flash Supply switched off
Comentarios a estos manuales